TX7 revamp is complete

Finally happy with it, I still need to tweak a few things (mainly tolerances) but this should be releasing within a few more days.

TX22 TX7 add-ons & Alterations:

- Modified Cranks Skelly Brace removed QD in rear, altered brace arm to work with MCXish, also cut out the section inline to the tailhook with matching geometry to be more comfortably braced

- Modified MCXish Folding Adapter extended to flush against the back of the chassis, also lowered the rear portion as to work better with the charging handle

- Modified Mo Grip fits cleanly on the lower rail (MP9 Vibes)

- Printable MP7 Iron Sights functional elevation/windage adjustments

- TX7 Chassis has the front opened up slightly to accept suppressors

All original creators will be credited once I write up a guide. Most is self explanatory however the MP7 sights need a "read me" of their own. Sights will require drilling out each hole as theyre made undersized on purpose.

Inspiration is from the MP7 and MP9.

Note: The purpose of the lower folding adapter along with the curved brace arm is to clear below the left sides picatinny rail. This way if you have a light or laser mounted the brace won't interfere when folded.

Additionally, I'll be trying to design a weighted back plate within the limited space left within the chassis, this may require extending the chassis slightly. This will only be necessary when running an FRT suppressed as the Gen 2 slides dont have enough mass to stay in battery and not bounce open.