Skip Navigation

kaewon

@ kaewon @forum.guncadindex.com

Posts
8
Comments
99
Joined
10 mo. ago

  • PA6 drying

    Jump

  • S4 only does 70c so not worth buying. If you look for deals, there are larger food dehydrators around 100 that will do 90c and fit 3kg spools. Put in a spool holder and you can print out of them.

  • PA6 drying

    Jump

  • You said 110c so you mean the e2 not the s2? S2 only goes to 70c. E2 goes to 110c.

  • PA6 drying

    Jump

  • FDE ODG color comparison

    Jump

  • A quick dive into some basic photography knowledge. You'd calibrate to RGB as that's what monitors are comprised of. Typically you'd have to use an external device but the best way without one is http://www.lagom.nl/lcd-test/. However most people don't even have professional monitors so couldn't even calibrate well which makes it's futile. You'd still get a very large variance in color especially from an average joe just eye balling it.

    The photo itself has a white piece of paper for white balancing. If I had photoshop, I could color correct it...correctly. The only solution still goes back to a relative comparison. Just buy one of the filaments, a cheap spool of pla pro, and it'll get the job done.

  • Apache case sale

    Jump

  • Ammo cans are also $10.

  • Apache case sale

    Jump

  • Camo Stencil tool for 3D printers and laser cutters

    Jump

  • Would the people that use this please post the files? Then we can group the files together and have a stencil pack.

  • 2011maxxin

    Jump

  • The colt is 45 so not relevant other than mentioning price. The llamas are 1911 which were also made in 9mm, 22lr, 380 and some others but I can't find concrete info on fitment. Some say it doesn't fit but others have swapped parts so it might just be normal 1911 cross-company issues.

  • 2011maxxin

    Jump

  • I already have a colt kit that was 300 which is why a ria 9mm kit for the same price doesn't appeal to me. I forgot to mention the llama kits that are below 100 that I was looking at before that I will likely get

  • 2011maxxin

    Jump

  • There's also llama kits for sub 100 but those might need their own design

  • 2011maxxin

    Jump

  • I was going to make it glock mag compatible which cuts cost on mags I already have and printing mag catch.

  • 2011maxxin

    Jump

  • I can buy a whole 1911 9mm for 300 which makes them unreasonable to me. Someone said they have seen sales down to 200 but I have yet to see it.

  • 2011maxxin

    Jump

  • I still haven't found a reasonably priced kit.

  • $100 mac bolts at Kak.

    Jump

  • 100 is their usual price. It says on sale but it's constantly on sale.

  • Plastikov v4 kits

    Jump

  • I meant specifically from aoa. I too own a romanian kit but wasn't bought from them. It was similar price but came with the furniture and had cut receiver nubs. I think anyone building an ak knows cugir is probably the cheapest decent ak kits.

  • Plastikov v4 kits

    Jump

  • Yes and I believe they are the most commonly used kit because they are always in stock.

  • Pa6-cf vs pla+ dimensional accuracy

    Jump

  • Calibration should have been the first step before printing anything. Every printer needs to be calibrated. Every filament needs to be calibrated.

    20mm cube is too small plus 100mm makes it much easier. If it comes out to 99.88mm then shrinkage is 99.88 in orca.

    Pa6 should be measured after annealing and moisture conditioning. Annealing can cause it to shrink but moisture can cause it to expand.

  • 3 prong vs 4 prong? - Fossberg 500

    Jump

  • This is py2a 500 not fossberg. The prong nut is an odd choice for what they are using to hold the ejector screw on. There are remixes of the normal recievers and the fossberg use a standard nut or square nut. I dont think I saw one for the space trench.