Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)T

Temperfest

@ Temperfest @forum.guncadindex.com

Posts
1
Comments
4
Joined
1 mo. ago

  • Modifications For Printing PA6-CF On Bambu Lab P1S

    Jump

  • as far as hardware the hardened steel nozzle is a must. Another thing you need is some glue sticks for bed adhesion or printing at a 45° angle or both lmao. Also i use 300blkfde settings for printing but slowing it down is definitely a must. When i first tried pa6 i was impatient and had a lot of warp issues so just make sure you do all necessary steps and you’ll be chillin.

  • ftn 4 warp issues

    Jump

  • yeah its curling on the edges off of the plate. I took a look at the cfx plate and might have to try it

  • ftn 4 warp issues

    Jump

  • thanks I just got a good print now I let the chamber heat up some more it looked like it may have curled up toward the end but it looks pretty good and the built in supports came off easy but Ill definitely try that glue ive just been using elmers glue sticks lol

  • General Discussion @forum.guncadindex.com
    Temperfest

    ftn 4 warp issues

    Ive been trying to print out the ftn 4 556 version and i want to print it out of pa6 but I keep getting very slight warping im using blkfde300 settings using p1s using gluestick on my bed preheating the chamber and drying the filament in a dryer before and during printing normally i just orient it to a 45° angle but the stl has the built in supports and i havent found a version that is without supports any help appreciated