https://odysee.com/@clearview4851:e/notachi-update-rc4:e

  • default is printed only version. Steel parts and related the lower frame and the cylinder included for reference.
  • printing and post-print processing optimizations.
  • change tension spring pins positions (tension distance increased twise), now the hammer easely sets almost any primer. Drawback is that dowel nut is not anymore held by a M4 bolt. Instead the upper tension springs pin going trough it. This is very loose, and I recomment to put some JBwield there. but I’m using as is without any noticeable issues.
  • hammer releasing changed (finally!) The trigger now is much easyer at break. Tho still quite heavy at pull.
  • the lower tension springs pin changed to m3 bolt. This is workaround to the pin walking out. If your pin can stay at it’s place - good for you. The frame covers without bolt head and nut cutouts included.
  • included grips inserts for the Testing-Rest-Not-Ransom.