I finished this build about a month ago and never got to show it off to the community, so here goes. Had a lot of fun building it, most of the internals are from parts dispensed however I got the 16” barrel from maf, and the tube adapter from riptide. I wanted a Fgc9 that felt more like a traditional rifle versus SBR. I got about 500 rds through her and she’s running great aside from a few failure to feed which I believe is to be expected when breaking it in. Might sound weird but Out of all my builds I feel something special with this one. It’s was made with polymaker PLA pro. Feel free to critique or criticize I’m always looking to improve my skills as a 3D2A builder of freedom dispensers.
Nice. But if you really want improve your “skills” than dont buy Kits! Make the Barrel self with ECM and drill your own bolt! Using original FCG is okay, because the printed one works but is not the best feeling. However for me a build with a KIT is not a highly gunsmithing work. Everybody can do it. But for a real selfmade build you need some more skills! Make one. Just for you. After this experience you can build really own guns! However every one build more is good for the world! Nobody can stop the signal