jkiop to General DiscussionEnglish · 11 days agodoes anyone have this filesimagemessage-square6linkfedilinkarrow-up16arrow-down12
arrow-up14arrow-down1imagedoes anyone have this filesjkiop to General DiscussionEnglish · 11 days agomessage-square6linkfedilink
minus-squareJackBrushlinkfedilinkEnglisharrow-up1·6 days agoyou would need a step file which you then CAM and then post to gcode. if that file is right you could theoretically do it. its a very very large undertaking. you 100% aren’t going to do this https://github.com/maduce/defcad-repo/tree/master/Pistols/Glock_G34_Model this guy recreated a g34 and has it on his github. its not a 26, and its probably not all that accurate anyway since all of the reference files on FedCad are recreations like this one.
you would need a step file which you then CAM and then post to gcode. if that file is right you could theoretically do it. its a very very large undertaking.
you 100% aren’t going to do this
https://github.com/maduce/defcad-repo/tree/master/Pistols/Glock_G34_Model this guy recreated a g34 and has it on his github. its not a 26, and its probably not all that accurate anyway since all of the reference files on FedCad are recreations like this one.