Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)M

metcape

@ metcape @forum.guncadindex.com

Posts
3
Comments
9
Joined
7 mo. ago

  • 3D2A @fosscad.io
    metcape

    Odin 37mm Kits Now Available!

    Good morning, Good Afternoon, and Good Evening everyone,

    As posted a number of weeks ago, I started work on producing Odin 37mm Kits due to the lack of options after INMC got out of the business.

    I'm now happy to announce that these have been completed and are now ready for sale! I've had a small pre-sale to our Element Launcher Group Chat and am now opening up to Lemmy with Reddit posting coming later next week.

    Currently 6 kits remain from the original run of 10, depending on how these do I would like to keep these in stock for the community.

    Pricing is $200 for the bundle with the main kit, upgraded metal spline, and Rogue Stock Hardware shipped with PayPal G&S included.

    These kits have been fully processed, all bolts, rods, and springs cut to length, barrel cut, chamfered, chambered, and outside sanded for epoxy. Parts bagged in sections to help assembly run smoothly!

    If there's any questions let me know!

  • Anyone got tha news yet?

    Jump

  • I reached out to CS as I also noted lower TDS specs (notice that PLA not plus/pro has higher levels then PLA Pro that we all love), they responded with a generic plan to take my and others concerns into consideration.

    They say that the new PLA Pro has a "decent increase in impact strength" which is what we are mostly worried about and not a spec on the TDS. But also confirm the TDS as correct and being lower then Polylite PLA Pro in most stats.

    They then teased "upcoming products that can likely hit these needs as well". So potentially another new branding/ product that may work better? Guess we'll see

  • Odin 37mm Parts Kit Interest?

    Jump

  • I looked over the Geneva Breacher, and it looks like it's a weaker option over the Odin. My understanding is that the Odin is one of the strongest designs so far released. Its 40mm options being one of the proofs of this statement.

    However, how much stronger and if that really matters is highly up for debate. Either way aesthetics will likely be a big part of people's choice too.

    I think I'm resolved to only do a 10 pc MOQ so if it doesn't work out then I should be able to move that many and close up.

    Also looking at doing a Pipehitter kit based on recommendations from some interested people but that will be in the $85-90 range since its BOM is a mess.

  • Odin 37mm Parts Kit Interest?

    Jump

  • I'm far from a material engineer so take what I'm saying with a healthy pinch of salt. The 304 tubing I'm sure is fine, but 4130 has higher Rockwell hardness. MCMC doesn't show comparable pressure ratings for their 4130 and the 304 so its hard to gauge but hardness is going to be an okay sub at these pressures. 37mm is as I understand a low pressure round and can have a bit of a hotdog down a hallway effect anyways.

    However my tubing is roughly $20 cheaper for the same 4 8in tubes and comes precut so I don't have to use my eyeballs and gunsmif degree to cut a sloppy angle.

    And I'd much rather have a (likely slightly) better tube with minimal inputs over a more expensive labor-intensive tubing.

  • Odin 37mm Parts Kit Interest?

    Jump

  • If you buy a kit from me it is lol

    But I honestly can't say, I haven't built one due to never being able to find a kit. Which is why I want to in the first place.

    I will say, this was considered one of the best and strongest designs as it is rated for 40mm which puts more stress on the components.

    My idea is if I move forward with making kits, I'll build one or two for myself to test before buying parts and making a mistake on customer kits. Have the parts printing currently so should be able to test this soon

  • Odin 37mm Parts Kit Interest?

    Jump

  • I don't think I can help with a solid breech block. Barrel is easy enough, but it be better to source yourself for just that

  • 3D2A @fosscad.io
    metcape

    Odin 37mm Parts Kit Interest?

    Looking to gauge interest in Odin Parts kits since they have been OOS for over a year as far as I can tell.

    Have priced out components and considered all factors for a 10 pc and 25pc run.

    My baseline is the INMC kits, so these do not have the spine (Xometry wanted between $60-$82 for one) and a stronger 4130 chromoly barrel.

    A 10pc run would roughly be $155 shipped per kit, while a 25pc run would be $145 shipped to the CONUS.

    Sales would likely be done through Paypal G&S to protect buyers.

    Let me know if this would interest anyone in the community.

  • Just linking a company that still has the Breek castle blast shield in stock

    Jump

  • Keep blasting Breek with questions. I've been asking them to release the print and .stps

  • Listen up, GunCAD. We need to talk.

    Jump

  • Eagerly awaiting the Discord ban response

  • Odin Files/Parts Kits?

    Jump

  • Yeah, I was finally able to find it.

    I like buying parts kits to help support the people supporting us. So, I'd really rather buy then source some bolts and such.

  • Help & Support @forum.guncadindex.com
    metcape

    Odin Files/Parts Kits?

    Anyone know what happened to GoonGunDesigns or the Odin 37mm?

    Wanting to get a parts kit but INMC has been OOS for months with nothing in. Saw his site was referenced as having kits but its down.

    Also having trouble finding the files on the Index or Odysee.

  • [Idea] Electroplating reinforcement for 3D printing.

    Jump

  • I believe you can coat/paint material in a conductive primer which allows for electroplating to be successful