I want to build a box that i can test fire into that will reduce the noise considerably so i can test fire into my garage. Has anyone built something like this. Is it feasible im thinking something i can insert my hand and pistols into that will catch the bullets and not disturb/alert my neighbors. Any ideas of what would be required Im thinking something similar to the “ftn shut your trap” but not something that sits at the end of the barrel something that encompasses the entire gun like a mini soundproof room

  • SgtButters
    link
    fedilink
    English
    arrow-up
    1
    ·
    13 hours ago

    I used setup of 50 litre can filled with 25kg of rubber mulch. 5mm steel plate behind can for safety. All stuff in 60x60x100 box filled with rockwool, at least 15-20 cm each side. Were quite.

  • GunPrntr
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 day ago

    You can make a cheap bullet trap with a Home Depot 5 gallon bucket and rubber mulch. It will stop small calibers and give you something safe to shoot at. As far as reducing noise I’ve just used an FTN and subsonic ammo. Not perfect but it helps. Let me know if you come up with anything interesting.

    • Carmakazi@fosscad.io
      link
      fedilink
      English
      arrow-up
      1
      ·
      23 hours ago

      In addition to this, hanging some old blankets surrounding your test area may be of marginal help, the thicker the better.

  • gloomweaver
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 days ago

    Build a box out of plywood, insulate around it with rockwool, and build another box on the outside of that, also insulated. Should be a good start at least. Don’t forget the backstop!